Merge pull request #438 from barry-ran/dev

Dev

CMakeLists.txt

@@ -0,0 +1,21 @@
+cmake_minimum_required(VERSION 3.19 FATAL_ERROR)
+
+# Read version numbers from file
+file (STRINGS ${CMAKE_CURRENT_SOURCE_DIR}/QtScrcpy/version STRING_VERSION)
+message(STATUS "QtScrcpy Version ${STRING_VERSION}")
+project(QtScrcpy
+    VERSION ${STRING_VERSION}
+    LANGUAGES C CXX
+)
+
+if(${CMAKE_SYSTEM_NAME} MATCHES "Darwin")
+    enable_language(OBJCXX)
+endif()
+
+# Split version numbers
+string(REPLACE "." ";" VERSION_LIST ${STRING_VERSION})
+list(GET VERSION_LIST 0 VERSION_MAJOR)
+list(GET VERSION_LIST 1 VERSION_MINOR)
+list(GET VERSION_LIST 2 VERSION_PATCH)
+
+add_subdirectory(QtScrcpy)

QtScrcpy/CMakeLists.txt

@@ -0,0 +1,318 @@
+set(CMAKE_AUTOUIC ON)
+set(CMAKE_AUTOMOC ON)
+set(CMAKE_AUTORCC ON)
+
+set(CMAKE_CXX_STANDARD 11)
+set(CMAKE_CXX_STANDARD_REQUIRED ON)
+
+# ***********************************************************
+# Qt Package finding
+# ***********************************************************
+
+find_package(QT NAMES Qt6 Qt5 COMPONENTS Widgets Network LinguistTools REQUIRED)
+find_package(Qt${QT_VERSION_MAJOR} COMPONENTS Widgets Network LinguistTools REQUIRED)
+
+# ***********************************************************
+# Cross-platform settings
+# ***********************************************************
+
+if(CMAKE_CXX_COMPILER_ID STREQUAL "MSVC")
+
+    # FFmpeg cannot be compiled natively by MSVC version < 12.0 (2013)
+    if(MSVC_VERSION LESS 1800)
+        message(FATAL_ERROR "[QtScrcpy] FATAL ERROR: MSVC version is older than 12.0 (2013).")
+    endif()
+
+    SET(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} /utf-8")
+    SET(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /utf-8")
+
+endif()
+
+
+# ==================== macOS ====================
+if(${CMAKE_SYSTEM_NAME} MATCHES "Darwin")
+    # QS_MAC_RESOURCES: esource file list stored in Contents/MacOS
+    file(GLOB QS_MAC_RESOURCES "${PROJECT_SOURCE_DIR}/third_party/ffmpeg/lib/*.dylib")
+    list(APPEND QS_MAC_RESOURCES
+        "${PROJECT_SOURCE_DIR}/third_party/scrcpy-server"
+        "${PROJECT_SOURCE_DIR}/adb/mac/adb"
+    )
+
+    # QS_MAC_CONFIG: Config file stored in Contents/MacOS/config
+    set(QS_MAC_CONFIG "${PROJECT_SOURCE_DIR}/config/config.ini")
+endif()
+
+set(QS_TS_FILES
+    ${CMAKE_CURRENT_SOURCE_DIR}/res/i18n/zh_CN.ts
+    ${CMAKE_CURRENT_SOURCE_DIR}/res/i18n/en_US.ts
+    )
+set_source_files_properties(${QS_TS_FILES} PROPERTIES OUTPUT_LOCATION "${CMAKE_CURRENT_SOURCE_DIR}/res/i18n")
+
+set(QS_SOURCES_MAIN
+    dialog.cpp
+    dialog.h
+    dialog.ui
+    ${QS_TS_FILES}
+)
+
+set(QS_QRC_MAIN "${CMAKE_CURRENT_SOURCE_DIR}/res/res.qrc")
+
+if(${QT_VERSION_MAJOR} GREATER_EQUAL 6)                         # Qt version 6
+    qt_create_translation(QS_QM_FILES ${CMAKE_CURRENT_SOURCE_DIR} ${QS_TS_FILES})
+
+    if(WIN32)
+        qt_add_executable(${CMAKE_PROJECT_NAME} WIN32 MANUAL_FINALIZATION
+            main.cpp
+            ${QS_SOURCES_MAIN}
+            ${QS_QRC_MAIN}
+        )
+
+    elseif(UNIX)
+        if(${CMAKE_SYSTEM_NAME} MATCHES "Darwin")
+            qt_add_executable(${CMAKE_PROJECT_NAME} MACOSX_BUNDLE MANUAL_FINALIZATION
+                main.cpp
+                ${QS_SOURCES_MAIN}
+                ${QS_MAC_RESOURCES}
+                ${QS_MAC_CONFIG}
+                ${QS_QRC_MAIN}
+            )
+
+        else()
+            qt_add_executable(${CMAKE_PROJECT_NAME} MANUAL_FINALIZATION
+                main.cpp
+                ${QS_SOURCES_MAIN}
+                ${QS_QRC_MAIN}
+            )
+
+        endif()
+    endif()
+
+else()                                                          # Qt version 5
+    qt5_create_translation(QS_QM_FILES ${CMAKE_CURRENT_SOURCE_DIR} ${QS_TS_FILES})
+
+    if(WIN32)
+        add_executable(${CMAKE_PROJECT_NAME} WIN32
+            main.cpp
+            ${QS_SOURCES_MAIN}
+            ${QS_QRC_MAIN}
+        )
+    elseif(UNIX)
+        if(${CMAKE_SYSTEM_NAME} MATCHES "Darwin")
+            add_executable(${CMAKE_PROJECT_NAME} MACOSX_BUNDLE
+                main.cpp
+                ${QS_SOURCES_MAIN}
+                ${QS_MAC_RESOURCES}
+                ${QS_MAC_CONFIG}
+                ${QS_QRC_MAIN}
+            )
+        else()
+            add_executable(${CMAKE_PROJECT_NAME}
+                main.cpp
+                ${QS_SOURCES_MAIN}
+                ${QS_QRC_MAIN}
+            )
+        endif()
+    endif()
+
+endif()
+
+# ******************** Microsoft Windows ********************
+if(WIN32)
+    message(STATUS "[QtScrcpy] Make for Microsoft Windows.")
+
+    # 通过rc的方式的话，VERSION变量rc中获取不到,定义为宏方便rc中使用
+    # Define macros for .rc file
+    add_compile_definitions(
+        VERSION_MAJOR=${VERSION_MAJOR}
+        VERSION_MINOR=${VERSION_MINOR}
+        VERSION_PATCH=${VERSION_PATCH}
+        VERSION_RC_STR=\\\"${VERSION_MAJOR}.${VERSION_MINOR}.${VERSION_PATCH}\\\"
+    )
+
+    if(CMAKE_SIZEOF_VOID_P EQUAL 8)                                     # Compiler is 64-bit
+        message(STATUS "[QtScrcpy] 64-bit compiler detected.")
+
+        set(QS_LIB_PATH "${PROJECT_SOURCE_DIR}/third_party/ffmpeg/lib/x64")
+        if(CMAKE_BUILD_TYPE STREQUAL "Debug")
+            message(STATUS "[QtScrcpy] In debug mode.")
+            set_target_properties(${CMAKE_PROJECT_NAME} PROPERTIES
+                RUNTIME_OUTPUT_DIRECTORY "${PROJECT_SOURCE_DIR}/output/win/x64/debug"
+                )
+        else()
+            message(STATUS "[QtScrcpy] In release mode.")
+            set_target_properties(${CMAKE_PROJECT_NAME} PROPERTIES
+                RUNTIME_OUTPUT_DIRECTORY "${PROJECT_SOURCE_DIR}/output/win/x64/release")
+        endif()
+
+        set(QS_DLL_PATH "${PROJECT_SOURCE_DIR}/third_party/ffmpeg/bin/x64")
+    elseif(CMAKE_SIZEOF_VOID_P EQUAL 4)                                 # Compiler is 32-bit
+        message(STATUS "[QtScrcpy] 32-bit compiler detected.")
+
+        set(QS_LIB_PATH "${PROJECT_SOURCE_DIR}/third_party/ffmpeg/lib/x86")
+        if(CMAKE_BUILD_TYPE STREQUAL "Debug")
+            message(STATUS "[QtScrcpy] In debug mode.")
+            set_target_properties(${CMAKE_PROJECT_NAME} PROPERTIES
+                RUNTIME_OUTPUT_DIRECTORY "${PROJECT_SOURCE_DIR}/output/win/x86/debug")
+        else()
+            message(STATUS "[QtScrcpy] In release mode.")
+            set_target_properties(${CMAKE_PROJECT_NAME} PROPERTIES
+                RUNTIME_OUTPUT_DIRECTORY "${PROJECT_SOURCE_DIR}/output/win/x86/release")
+        endif()
+
+        set(QS_DLL_PATH "${PROJECT_SOURCE_DIR}/third_party/ffmpeg/bin/x86")
+    endif()
+
+    # 构建完成后复制DLL依赖库
+    # Copy DLL dependencies after building
+    get_target_property(QS_RUNTIME_OUTPUT_DIRECTORY ${CMAKE_PROJECT_NAME} RUNTIME_OUTPUT_DIRECTORY)
+    file(GLOB QS_DLL_FILES "${QS_DLL_PATH}/*.dll")
+    foreach(QS_DLL_FILE ${QS_DLL_FILES})
+        add_custom_command(TARGET ${CMAKE_PROJECT_NAME} POST_BUILD COMMAND
+            ${CMAKE_COMMAND} -E copy_if_different
+            "${QS_DLL_FILE}" "${QS_RUNTIME_OUTPUT_DIRECTORY}"
+        )
+    endforeach()
+
+    # If MinGW is used, it is not appropriate to link static MSVC libs.
+    # Instead, we link DLLs directly
+    if(MSVC)
+        message(STATUS "[QtScrcpy] Microsoft Visual C++ is used.")
+        link_directories(${QS_LIB_PATH})
+        set(QS_EXTERNAL_LIBS_FFMPEG
+            avformat
+            avcodec
+            avutil
+            swscale
+        )
+    elseif(MINGW)
+        message(STATUS "[QtScrcpy] MinGW GCC is used.")
+        target_link_options(${CMAKE_PROJECT_NAME} PRIVATE
+            "-static"
+            ${QS_DLL_FILES}
+            "-Wl,--enable-stdcall-fixup"
+            )
+    endif()
+
+    set(RC_FILE "${CMAKE_CURRENT_SOURCE_DIR}/res/QtScrcpy.rc")
+
+# ******************** Unix-like OSs ********************
+elseif(UNIX)
+    set(QS_LIB_PATH "${PROJECT_SOURCE_DIR}/third_party/ffmpeg/lib")
+
+    # ==================== macOS ====================
+    if(${CMAKE_SYSTEM_NAME} MATCHES "Darwin")
+        message(STATUS "[QtScrcpy] Make for macOS.")
+        target_link_directories(${CMAKE_PROJECT_NAME} PRIVATE ${QS_LIB_PATH})
+
+        if(CMAKE_BUILD_TYPE STREQUAL "Debug")
+            set_target_properties(${CMAKE_PROJECT_NAME} PROPERTIES
+                RUNTIME_OUTPUT_DIRECTORY "${PROJECT_SOURCE_DIR}/output/mac/debug")
+        else()
+            set_target_properties(${CMAKE_PROJECT_NAME} PROPERTIES
+                RUNTIME_OUTPUT_DIRECTORY "${PROJECT_SOURCE_DIR}/output/mac/release")
+        endif()
+
+        # Icon file stored in Contents/Resources
+        set(QS_MAC_ICON_NAME "QtScrcpy.icns")
+        set(QS_MAC_ICON_PATH "${CMAKE_CURRENT_SOURCE_DIR}/res/${QS_MAC_ICON_NAME}")
+
+        set_source_files_properties(${QS_MAC_RESOURCES} PROPERTIES
+            MACOSX_PACKAGE_LOCATION "MacOS"
+        )
+        set_source_files_properties(${QS_MAC_CONFIG} PROPERTIES
+            MACOSX_PACKAGE_LOCATION "MacOS/config"
+        )
+
+        set(QS_EXTERNAL_LIBS_FFMPEG
+            avformat.58
+            avcodec.58
+            avutil.56
+            swscale.5
+        )
+
+        set_target_properties(${CMAKE_PROJECT_NAME} PROPERTIES
+            # The base plist template file
+            MACOSX_BUNDLE_INFO_PLIST "${CMAKE_CURRENT_SOURCE_DIR}/res/Info_Mac.plist"
+            # The elements to be overwritten
+            MACOSX_BUNDLE_ICON_FILE "${QS_MAC_ICON_NAME}"
+            MACOSX_BUNDLE_BUNDLE_VERSION "${STRING_VERSION}"
+            MACOSX_BUNDLE_SHORT_VERSION_STRING "${STRING_VERSION}"
+            MACOSX_BUNDLE_LONG_VERSION_STRING "${STRING_VERSION}"
+
+            # Copy file(s) to Contents/Resources
+            RESOURCE "${QS_MAC_ICON_PATH}"
+        )
+
+    # =============== Non-Mac OSs (Linux, BSD, etc.) ===============
+    else()
+        if(CMAKE_BUILD_TYPE STREQUAL "Debug")
+            set_target_properties(${CMAKE_PROJECT_NAME} PROPERTIES
+                RUNTIME_OUTPUT_DIRECTORY "${PROJECT_SOURCE_DIR}/output/linux/debug")
+        else()
+            set_target_properties(${CMAKE_PROJECT_NAME} PROPERTIES
+                RUNTIME_OUTPUT_DIRECTORY "${PROJECT_SOURCE_DIR}/output/linux/release")
+        endif()
+
+        find_package(Threads REQUIRED)
+
+        message(STATUS "[QtScrcpy] Make for non-Mac Unix-like OS.")
+        set(INSTALLED_FFMPEG_FOUND false)
+
+        find_package(PkgConfig)
+        if(PkgConfig_FOUND)
+            pkg_check_modules(FFmpeg libavformat>=58 libavcodec>=58 libavutil>=56 libswscale>=5)
+            if(FFmpeg_FOUND)
+                set(INSTALLED_FFMPEG_FOUND true)
+                message(STATUS "[QtScrcpy] Development files of FFmpeg were detected in your OS and will be used.")
+                target_link_options(${CMAKE_PROJECT_NAME} PRIVATE ${FFmpeg_LDFLAGS})
+                target_compile_options(${CMAKE_PROJECT_NAME} PRIVATE ${FFmpeg_CFLAGS})
+                set(QS_EXTERNAL_LIBS_FFMPEG ${FFmpeg_LIBRARIES})
+            endif()
+        endif()
+
+        if(NOT INSTALLED_FFMPEG_FOUND)
+            message(STATUS "[QtScrcpy] Development files of FFmpeg were not detected in your OS. Files within third_party/ffmpeg/ will be used.")
+            target_link_directories(${CMAKE_PROJECT_NAME} PRIVATE ${QS_LIB_PATH})
+            set(QS_EXTERNAL_LIBS_FFMPEG
+                avformat
+                avcodec
+                avutil
+                swscale
+                Threads::Threads
+            )
+        endif()
+    endif()
+endif()
+
+target_include_directories(${CMAKE_PROJECT_NAME} PRIVATE ${CMAKE_CURRENT_SOURCE_DIR})
+
+set(QS_SUBDIRECTORIES_MAIN
+    adb
+    common
+    device
+    devicemanage
+    fontawesome
+    uibase
+    util
+)
+foreach(QS_SUBDIRECTORY_MAIN ${QS_SUBDIRECTORIES_MAIN})
+    add_subdirectory(${QS_SUBDIRECTORY_MAIN})
+endforeach()
+
+target_link_libraries(${CMAKE_PROJECT_NAME} PUBLIC
+    adb
+    devicemanage
+    )
+
+target_link_libraries(${CMAKE_PROJECT_NAME} PRIVATE
+    Qt${QT_VERSION_MAJOR}::Widgets
+    Qt${QT_VERSION_MAJOR}::Network
+    device
+        stream
+        ui
+    util
+    )
+
+if(QT_VERSION_MAJOR EQUAL 6)
+    qt_finalize_executable(${CMAKE_PROJECT_NAME})
+endif()

QtScrcpy/QtScrcpy.pro

@@ -48,10 +48,6 @@ HEADERS += \
 FORMS += \
         dialog.ui
 
-# 试用检查
-# DEFINES += TRIAL_EXPIRE_CHECK
-DEFINES += TRIAL_TIMES=10
-
 # 子工程
 include ($$PWD/common/common.pri)
 include ($$PWD/adb/adb.pri)

QtScrcpy/adb/CMakeLists.txt

@@ -0,0 +1,11 @@
+set(QS_SOURCES_ADB
+    adbprocess.h
+    adbprocess.cpp
+)
+
+add_library(adb ${QS_SOURCES_ADB})
+target_include_directories(adb PUBLIC ${CMAKE_CURRENT_SOURCE_DIR})
+target_link_libraries(adb PRIVATE
+    Qt${QT_VERSION_MAJOR}::Widgets
+    util
+    )

QtScrcpy/common/CMakeLists.txt

@@ -0,0 +1,6 @@
+set(QS_SOURCES_COMMON
+    qscrcpyevent.h
+)
+
+add_library(common INTERFACE ${QS_SOURCES_COMMON})
+target_include_directories(common INTERFACE ${CMAKE_CURRENT_SOURCE_DIR})

QtScrcpy/device/CMakeLists.txt

@@ -0,0 +1,40 @@
+set(QS_SUBDIRECTORIES_DEVICE
+    android
+    controller
+    decoder
+    filehandler
+    recorder
+    render
+    server
+    stream
+    ui
+)
+
+set(QS_SOURCES_DEVICE
+    device.h
+    device.cpp
+)
+
+add_library(device ${QS_SOURCES_DEVICE})
+
+target_include_directories(device PUBLIC ${CMAKE_CURRENT_SOURCE_DIR})
+
+foreach(QS_SUBDIRECTORY_DEVICE ${QS_SUBDIRECTORIES_DEVICE})
+    add_subdirectory (${QS_SUBDIRECTORY_DEVICE})
+endforeach()
+
+target_link_libraries(device INTERFACE inputconvert)
+target_link_libraries(device PRIVATE
+    Qt${QT_VERSION_MAJOR}::Widgets
+    # device (self)
+        controller
+        decoder
+        filehandler
+        recorder
+        server
+        stream
+        ui
+    util
+        mousetap
+    )
+

QtScrcpy/device/android/CMakeLists.txt

@@ -0,0 +1,7 @@
+set(QS_SOURCES_DEVICE_ANDROID
+    input.h
+    keycodes.h
+)
+
+add_library(android INTERFACE ${QS_SOURCES_DEVICE_ANDROID})
+target_include_directories(android INTERFACE ${CMAKE_CURRENT_SOURCE_DIR})

QtScrcpy/device/controller/CMakeLists.txt

@@ -0,0 +1,26 @@
+SET(QS_SUBDIRECTORIES_DEVICE_CONTROLLER
+    inputconvert
+    receiver
+)
+
+SET(QS_SOURCES_DEVICE_CONTROLLER
+    controller.h
+    controller.cpp
+)
+
+add_library(controller ${QS_SOURCES_DEVICE_CONTROLLER})
+
+target_include_directories(controller PUBLIC ${CMAKE_CURRENT_SOURCE_DIR})
+
+foreach(QS_SUBDIRECTORY_DEVICE_CONTROLLER ${QS_SUBDIRECTORIES_DEVICE_CONTROLLER})
+    add_subdirectory (${QS_SUBDIRECTORY_DEVICE_CONTROLLER})
+endforeach()
+
+target_link_libraries(controller PUBLIC
+    inputconvert
+    )
+target_link_libraries(controller PRIVATE
+    Qt${QT_VERSION_MAJOR}::Widgets
+    receiver
+    server
+    )

QtScrcpy/device/controller/inputconvert/CMakeLists.txt

@@ -0,0 +1,39 @@
+SET(QS_SUBDIRECTORIES_DEVICE_CONTROLLER_INPUTCONVERT
+    keymap
+)
+
+set(QS_SOURCES_DEVICE_CONTROLLER_INPUTCONVERT
+    controlmsg.h
+    controlmsg.cpp
+    inputconvertbase.h
+    inputconvertbase.cpp
+    inputconvertgame.h
+    inputconvertgame.cpp
+    inputconvertnormal.h
+    inputconvertnormal.cpp
+)
+
+add_library(inputconvert ${QS_SOURCES_DEVICE_CONTROLLER_INPUTCONVERT})
+
+target_include_directories(inputconvert PUBLIC ${CMAKE_CURRENT_SOURCE_DIR})
+
+foreach(QS_SUBDIRECTORY_DEVICE_CONTROLLER_INPUTCONVERT ${QS_SUBDIRECTORIES_DEVICE_CONTROLLER_INPUTCONVERT})
+    add_subdirectory (${QS_SUBDIRECTORY_DEVICE_CONTROLLER_INPUTCONVERT})
+endforeach()
+
+target_link_libraries(inputconvert PUBLIC
+    common
+    # controller
+        android
+    )
+target_link_libraries(inputconvert INTERFACE
+    # controller
+        # inputconvert (self)
+            keymap
+    )
+target_link_libraries(inputconvert PRIVATE
+    Qt${QT_VERSION_MAJOR}::Widgets
+
+    controller
+    util
+    )

QtScrcpy/device/controller/inputconvert/inputconvertgame.cpp

@@ -2,12 +2,18 @@
 #include <QCursor>
 #include <QGuiApplication>
 #include <QTimer>
+#include <QTime>
+#include <QRandomGenerator>
 
 #include "inputconvertgame.h"
 
 #define CURSOR_POS_CHECK 50
 
-InputConvertGame::InputConvertGame(Controller *controller) : InputConvertNormal(controller) {}
+InputConvertGame::InputConvertGame(Controller *controller) : InputConvertNormal(controller) {
+    m_ctrlSteerWheel.delayData.timer = new QTimer(this);
+    m_ctrlSteerWheel.delayData.timer->setSingleShot(true);
+    connect(m_ctrlSteerWheel.delayData.timer, &QTimer::timeout, this, &InputConvertGame::onSteerWheelTimer);
+}
 
 InputConvertGame::~InputConvertGame() {}
 
@@ -138,8 +144,10 @@ void InputConvertGame::updateSize(const QSize &frameSize, const QSize &showSize)
 {
     if (showSize != m_showSize) {
         if (m_gameMap && m_keyMap.isValidMouseMoveMap()) {
+#ifdef QT_NO_DEBUG
             // show size change, resize grab cursor
             emit grabCursor(true);
+#endif
         }
     }
     m_frameSize = frameSize;
@@ -237,6 +245,55 @@ int InputConvertGame::getTouchID(int key)
 
 // -------- steer wheel event --------
 
+void InputConvertGame::getDelayQueue(const QPointF& start, const QPointF& end,
+                                     const double& distanceStep, const double& posStepconst,
+                                     quint32 lowestTimer, quint32 highestTimer,
+                                     QQueue<QPointF>& queuePos, QQueue<quint32>& queueTimer) {
+    double x1 = start.x();
+    double y1 = start.y();
+    double x2 = end.x();
+    double y2 = end.y();
+
+    double dx=x2-x1;
+    double dy=y2-y1;
+    double e=(fabs(dx)>fabs(dy))?fabs(dx):fabs(dy);
+    e /= distanceStep;
+    dx/=e;
+    dy/=e;
+
+    QQueue<QPointF> queue;
+    QQueue<quint32> queue2;
+    for(int i=1;i<=e;i++) {
+        QPointF pos(x1+(QRandomGenerator::global()->bounded(posStepconst*2)-posStepconst), y1+(QRandomGenerator::global()->bounded(posStepconst*2)-posStepconst));
+        queue.enqueue(pos);
+        queue2.enqueue(QRandomGenerator::global()->bounded(lowestTimer, highestTimer));
+        x1+=dx;
+        y1+=dy;
+    }
+
+    queuePos = queue;
+    queueTimer = queue2;
+}
+
+void InputConvertGame::onSteerWheelTimer() {
+    if(m_ctrlSteerWheel.delayData.queuePos.empty()) {
+        return;
+    }
+    int id = getTouchID(m_ctrlSteerWheel.touchKey);
+    m_ctrlSteerWheel.delayData.currentPos = m_ctrlSteerWheel.delayData.queuePos.dequeue();
+    sendTouchMoveEvent(id, m_ctrlSteerWheel.delayData.currentPos);
+
+    if(m_ctrlSteerWheel.delayData.queuePos.empty() && m_ctrlSteerWheel.delayData.pressedNum == 0) {
+        sendTouchUpEvent(id, m_ctrlSteerWheel.delayData.currentPos);
+        detachTouchID(m_ctrlSteerWheel.touchKey);
+        return;
+    }
+
+    if(!m_ctrlSteerWheel.delayData.queuePos.empty()) {
+        m_ctrlSteerWheel.delayData.timer->start(m_ctrlSteerWheel.delayData.queueTimer.dequeue());
+    }
+}
+
 void InputConvertGame::processSteerWheel(const KeyMap::KeyMapNode &node, const QKeyEvent *from)
 {
     int key = from->key();
@@ -271,27 +328,43 @@ void InputConvertGame::processSteerWheel(const KeyMap::KeyMapNode &node, const Q
         ++pressedNum;
         offset.rx() -= node.data.steerWheel.left.extendOffset;
     }
+    m_ctrlSteerWheel.delayData.pressedNum = pressedNum;
 
-    // action
+    // last key release and timer no active, active timer to detouch
     if (pressedNum == 0) {
-        // touch up release all
+        if (m_ctrlSteerWheel.delayData.timer->isActive()) {
-        int id = getTouchID(m_ctrlSteerWheel.touchKey);
+            m_ctrlSteerWheel.delayData.timer->stop();
-        sendTouchUpEvent(id, node.data.steerWheel.centerPos + m_ctrlSteerWheel.lastOffset);
+            m_ctrlSteerWheel.delayData.queueTimer.clear();
+            m_ctrlSteerWheel.delayData.queuePos.clear();
+        }
+
+        sendTouchUpEvent(getTouchID(m_ctrlSteerWheel.touchKey), m_ctrlSteerWheel.delayData.currentPos);
         detachTouchID(m_ctrlSteerWheel.touchKey);
+        return;
+    }
+
+    // process steer wheel key event
+    m_ctrlSteerWheel.delayData.timer->stop();
+    m_ctrlSteerWheel.delayData.queueTimer.clear();
+    m_ctrlSteerWheel.delayData.queuePos.clear();
+
+    // first press, get key and touch down
+    if (pressedNum == 1 && flag) {
+        m_ctrlSteerWheel.touchKey = from->key();
+        int id = attachTouchID(m_ctrlSteerWheel.touchKey);
+        sendTouchDownEvent(id, node.data.steerWheel.centerPos);
+
+        getDelayQueue(node.data.steerWheel.centerPos, node.data.steerWheel.centerPos+offset,
+                      0.01f, 0.002f, 2, 8,
+                      m_ctrlSteerWheel.delayData.queuePos,
+                      m_ctrlSteerWheel.delayData.queueTimer);
     } else {
-        int id;
+        getDelayQueue(m_ctrlSteerWheel.delayData.currentPos, node.data.steerWheel.centerPos+offset,
-        // first press, get key and touch down
+                      0.01f, 0.002f, 2, 8,
-        if (pressedNum == 1 && flag) {
+                      m_ctrlSteerWheel.delayData.queuePos,
-            m_ctrlSteerWheel.touchKey = from->key();
+                      m_ctrlSteerWheel.delayData.queueTimer);
-            id = attachTouchID(m_ctrlSteerWheel.touchKey);
-            sendTouchDownEvent(id, node.data.steerWheel.centerPos);
-        } else {
-            // jsut get touch id and move
-            id = getTouchID(m_ctrlSteerWheel.touchKey);
-        }
-        sendTouchMoveEvent(id, node.data.steerWheel.centerPos + offset);
     }
-    m_ctrlSteerWheel.lastOffset = offset;
+    m_ctrlSteerWheel.delayData.timer->start();
     return;
 }
 
@@ -349,18 +422,65 @@ void InputConvertGame::processKeyClickMulti(const KeyMap::DelayClickNode *nodes,
     }
 }
 
+void InputConvertGame::onDragTimer() {
+    if(m_dragDelayData.queuePos.empty()) {
+        return;
+    }
+    int id = getTouchID(m_dragDelayData.pressKey);
+    m_dragDelayData.currentPos = m_dragDelayData.queuePos.dequeue();
+    sendTouchMoveEvent(id, m_dragDelayData.currentPos);
+
+    if(m_dragDelayData.queuePos.empty()) {
+        delete m_dragDelayData.timer;
+        m_dragDelayData.timer = nullptr;
+
+        sendTouchUpEvent(id, m_dragDelayData.currentPos);
+        detachTouchID(m_dragDelayData.pressKey);
+
+        m_dragDelayData.currentPos = QPointF();
+        m_dragDelayData.pressKey = 0;
+        return;
+    }
+
+    if(!m_dragDelayData.queuePos.empty()) {
+        m_dragDelayData.timer->start(m_dragDelayData.queueTimer.dequeue());
+    }
+}
+
 void InputConvertGame::processKeyDrag(const QPointF &startPos, QPointF endPos, const QKeyEvent *from)
 {
     if (QEvent::KeyPress == from->type()) {
+        // stop last
+        if (m_dragDelayData.timer && m_dragDelayData.timer->isActive()) {
+            m_dragDelayData.timer->stop();
+            delete m_dragDelayData.timer;
+            m_dragDelayData.timer = nullptr;
+            m_dragDelayData.queuePos.clear();
+            m_dragDelayData.queueTimer.clear();
+
+            sendTouchUpEvent(getTouchID(m_dragDelayData.pressKey), m_dragDelayData.currentPos);
+            detachTouchID(m_dragDelayData.pressKey);
+
+            m_dragDelayData.currentPos = QPointF();
+            m_dragDelayData.pressKey = 0;
+        }
+
+        // start this
         int id = attachTouchID(from->key());
         sendTouchDownEvent(id, startPos);
-        sendTouchMoveEvent(id, endPos);
-    }
 
-    if (QEvent::KeyRelease == from->type()) {
+        m_dragDelayData.timer = new QTimer(this);
-        int id = getTouchID(from->key());
+        m_dragDelayData.timer->setSingleShot(true);
-        sendTouchUpEvent(id, endPos);
+        connect(m_dragDelayData.timer, &QTimer::timeout, this, &InputConvertGame::onDragTimer);
-        detachTouchID(from->key());
+        m_dragDelayData.pressKey = from->key();
+        m_dragDelayData.currentPos = startPos;
+        m_dragDelayData.queuePos.clear();
+        m_dragDelayData.queueTimer.clear();
+        getDelayQueue(startPos, endPos,
+                      0.01f, 0.002f, 0, 2,
+                      m_dragDelayData.queuePos,
+                      m_dragDelayData.queueTimer);
+        m_dragDelayData.timer->start();
     }
 }
 
@@ -509,9 +629,10 @@ bool InputConvertGame::switchGameMap()
     if (!m_keyMap.isValidMouseMoveMap()) {
         return m_gameMap;
     }
-
+#ifdef QT_NO_DEBUG
     // grab cursor and set cursor only mouse move map
     emit grabCursor(m_gameMap);
+#endif
     hideMouseCursor(m_gameMap);
 
     if (!m_gameMap) {

QtScrcpy/device/controller/inputconvert/inputconvertgame.h

@@ -2,6 +2,7 @@
 #define INPUTCONVERTGAME_H
 
 #include <QPointF>
+#include <QQueue>
 
 #include "inputconvertnormal.h"
 #include "keymap.h"
@@ -60,9 +61,18 @@ protected:
     bool checkCursorPos(const QMouseEvent *from);
     void hideMouseCursor(bool hide);
 
+    void getDelayQueue(const QPointF& start, const QPointF& end,
+                       const double& distanceStep, const double& posStepconst,
+                       quint32 lowestTimer, quint32 highestTimer,
+                       QQueue<QPointF>& queuePos, QQueue<quint32>& queueTimer);
+
 protected:
     void timerEvent(QTimerEvent *event);
 
+private slots:
+    void onSteerWheelTimer();
+    void onDragTimer();
+
 private:
     QSize m_frameSize;
     QSize m_showSize;
@@ -82,8 +92,15 @@ private:
         bool pressedDown = false;
         bool pressedLeft = false;
         bool pressedRight = false;
-        // for last up
+
-        QPointF lastOffset;
+        // for delay
+        struct {
+            QPointF currentPos;
+            QTimer* timer = nullptr;
+            QQueue<QPointF> queuePos;
+            QQueue<quint32> queueTimer;
+            int pressedNum = 0;
+        } delayData;
     } m_ctrlSteerWheel;
 
     // mouse move
@@ -95,6 +112,15 @@ private:
         int timer = 0;
         bool smallEyes = false;
     } m_ctrlMouseMove;
+
+    // for drag delay
+    struct {
+        QPointF currentPos;
+        QTimer* timer = nullptr;
+        QQueue<QPointF> queuePos;
+        QQueue<quint32> queueTimer;
+        int pressKey = 0;
+    } m_dragDelayData;
 };
 
 #endif // INPUTCONVERTGAME_H

QtScrcpy/device/controller/inputconvert/keymap/CMakeLists.txt

@@ -0,0 +1,8 @@
+set(QS_SOURCES_DEVICE_CONTROLLER_INPUTCONVERT_KEYMAP
+    keymap.h
+    keymap.cpp
+)
+
+add_library(keymap ${QS_SOURCES_DEVICE_CONTROLLER_INPUTCONVERT_KEYMAP})
+target_include_directories(keymap PUBLIC ${CMAKE_CURRENT_SOURCE_DIR})
+target_link_libraries(keymap PRIVATE Qt${QT_VERSION_MAJOR}::Widgets)

QtScrcpy/device/controller/receiver/CMakeLists.txt

@@ -0,0 +1,14 @@
+SET(QS_SOURCES_DEVICE_CONTROLLER_RECEIVER
+    devicemsg.h
+    devicemsg.cpp
+    receiver.h
+    receiver.cpp
+    )
+
+add_library(receiver ${QS_SOURCES_DEVICE_CONTROLLER_RECEIVER})
+target_include_directories(receiver PUBLIC ${CMAKE_CURRENT_SOURCE_DIR})
+target_link_libraries(receiver PRIVATE
+    Qt${QT_VERSION_MAJOR}::Widgets
+    Qt${QT_VERSION_MAJOR}::Network
+    util
+    )

QtScrcpy/device/decoder/CMakeLists.txt

@@ -0,0 +1,21 @@
+set(QS_SOURCES_DEVICE_DECODER
+    avframeconvert.h
+    avframeconvert.cpp
+    decoder.h
+    decoder.cpp
+    fpscounter.h
+    fpscounter.cpp
+    videobuffer.h
+    videobuffer.cpp
+)
+
+add_library(decoder ${QS_SOURCES_DEVICE_DECODER})
+target_include_directories(decoder PUBLIC
+    ${CMAKE_CURRENT_SOURCE_DIR}
+    "${PROJECT_SOURCE_DIR}/third_party/ffmpeg/include"
+    )
+target_link_libraries(decoder PUBLIC ${QS_EXTERNAL_LIBS_FFMPEG})
+target_link_libraries(decoder PRIVATE
+    Qt${QT_VERSION_MAJOR}::Widgets
+    util
+    )

QtScrcpy/device/device.cpp

@@ -212,6 +212,7 @@ void Device::initSignals()
             }
         });
         connect(m_server, &Server::connectToResult, this, [this](bool success, const QString &deviceName, const QSize &size) {
+            Q_UNUSED(deviceName);
             if (success) {
                 double diff = m_startTimeCount.elapsed() / 1000.0;
                 qInfo() << QString("server start finish in %1s").arg(diff).toStdString().c_str();
@@ -220,8 +221,11 @@ void Device::initSignals()
                 if (m_videoForm) {
                     // must be show before updateShowSize
                     m_videoForm->show();
-
+                    QString name = Config::getInstance().getNickName(m_params.serial);
-                    m_videoForm->setWindowTitle(deviceName);
+                    if (name.isEmpty()) {
+                        name = Config::getInstance().getTitle();
+                    }
+                    m_videoForm->setWindowTitle(name + "-" + m_params.serial);
                     m_videoForm->updateShowSize(size);
 
                     bool deviceVer = size.height() > size.width();

QtScrcpy/device/filehandler/CMakeLists.txt

@@ -0,0 +1,9 @@
+set(QS_SOURCES_DEVICE_FILEHANDLER
+    filehandler.h
+    filehandler.cpp
+)
+
+add_library(filehandler ${QS_SOURCES_DEVICE_FILEHANDLER})
+target_include_directories(filehandler PUBLIC ${CMAKE_CURRENT_SOURCE_DIR})
+target_link_libraries(filehandler PUBLIC adb)
+target_link_libraries(filehandler PRIVATE Qt${QT_VERSION_MAJOR}::Widgets)

QtScrcpy/device/recorder/CMakeLists.txt

@@ -0,0 +1,14 @@
+set(QS_SOURCES_DEVICE_RECORDER
+    recorder.h
+    recorder.cpp
+)
+
+add_library(recorder ${QS_SOURCES_DEVICE_RECORDER})
+target_include_directories(recorder PUBLIC
+    ${CMAKE_CURRENT_SOURCE_DIR}
+    "${PROJECT_SOURCE_DIR}/third_party/ffmpeg/include"
+    )
+target_link_libraries(recorder PRIVATE
+    Qt${QT_VERSION_MAJOR}::Widgets
+    util
+    )

QtScrcpy/device/render/CMakeLists.txt

@@ -0,0 +1,8 @@
+set(QS_SOURCES_DEVICE_RENDER
+    qyuvopenglwidget.h
+    qyuvopenglwidget.cpp
+)
+
+add_library(render ${QS_SOURCES_DEVICE_RENDER})
+target_include_directories(render PUBLIC ${CMAKE_CURRENT_SOURCE_DIR})
+target_link_libraries(render PRIVATE Qt${QT_VERSION_MAJOR}::Widgets)

QtScrcpy/device/server/CMakeLists.txt

@@ -0,0 +1,20 @@
+set(QS_SOURCES_DEVICE_SERVER
+    server.h
+    server.cpp
+    tcpserver.h
+    tcpserver.cpp
+    videosocket.h
+    videosocket.cpp
+)
+
+add_library(server ${QS_SOURCES_DEVICE_SERVER})
+target_include_directories(server PUBLIC ${CMAKE_CURRENT_SOURCE_DIR})
+target_link_libraries(server PUBLIC
+    Qt${QT_VERSION_MAJOR}::Network
+    adb
+    )
+target_link_libraries(server PRIVATE
+    Qt${QT_VERSION_MAJOR}::Widgets
+    common
+    util
+    )

QtScrcpy/device/stream/CMakeLists.txt

@@ -0,0 +1,20 @@
+set(QS_SOURCES_DEVICE_STREAM
+    stream.h
+    stream.cpp
+)
+
+add_library(stream ${QS_SOURCES_DEVICE_STREAM})
+target_include_directories(stream PUBLIC
+    ${CMAKE_CURRENT_SOURCE_DIR}
+    "${PROJECT_SOURCE_DIR}/third_party/ffmpeg/include"
+    )
+
+target_link_libraries(stream PUBLIC ${QS_EXTERNAL_LIBS_FFMPEG})
+target_link_libraries(stream PRIVATE
+    Qt${QT_VERSION_MAJOR}::Widgets
+    #controller
+        decoder
+        recorder
+        server
+    util
+    )

QtScrcpy/device/ui/CMakeLists.txt

@@ -0,0 +1,23 @@
+set(QS_SOURCES_DEVICE_UI
+    toolform.h
+    toolform.cpp
+    toolform.ui
+    videoform.h
+    videoform.cpp
+    videoform.ui
+)
+
+add_library(ui ${QS_SOURCES_DEVICE_UI})
+target_include_directories(ui PUBLIC ${CMAKE_CURRENT_SOURCE_DIR})
+target_include_directories(ui PRIVATE "${PROJECT_SOURCE_DIR}/third_party/ffmpeg/include")
+target_link_libraries(ui PUBLIC
+    device
+    uibase
+    )
+target_link_libraries(ui PRIVATE
+    Qt${QT_VERSION_MAJOR}::Widgets
+    controller
+        render
+    fontawesome
+    util
+    )

QtScrcpy/device/ui/videoform.cpp

@@ -367,16 +367,6 @@ QRect VideoForm::getScreenRect()
     return screenRect;
 }
 
-bool VideoForm::checkTrialExpire()
-{
-    static int trialTimes = 0;
-    if (++trialTimes > TRIAL_TIMES) {
-        QMessageBox::warning(this, "QtScrcpy", QStringLiteral("试用已结束，购买正式版本请联系作者"), QMessageBox::Ok);
-        return true;
-    }
-    return false;
-}
-
 void VideoForm::updateStyleSheet(bool vertical)
 {
     if (vertical) {
@@ -534,12 +524,6 @@ void VideoForm::setDevice(Device *device)
 
 void VideoForm::mousePressEvent(QMouseEvent *event)
 {
-#ifdef TRIAL_EXPIRE_CHECK
-    if (checkTrialExpire()) {
-        return;
-    }
-#endif
-
     if (event->button() == Qt::MiddleButton) {
         if (m_device && !m_device->isCurrentCustomKeymap()) {
             emit m_device->postGoHome();

QtScrcpy/device/ui/videoform.h

@@ -45,7 +45,6 @@ private:
     void moveCenter();
     void installShortcut();
     QRect getScreenRect();
-    bool checkTrialExpire();
 
 protected:
     void mousePressEvent(QMouseEvent *event);

QtScrcpy/devicemanage/CMakeLists.txt

@@ -0,0 +1,13 @@
+set(QS_SOURCES_DEVICEMANAGE
+    devicemanage.h
+    devicemanage.cpp
+)
+
+add_library(devicemanage ${QS_SOURCES_DEVICEMANAGE})
+target_include_directories(devicemanage PUBLIC ${CMAKE_CURRENT_SOURCE_DIR})
+target_link_libraries(devicemanage PUBLIC device)
+target_link_libraries(devicemanage PRIVATE
+    Qt${QT_VERSION_MAJOR}::Widgets
+        server
+        ui
+    )

QtScrcpy/dialog.cpp

@@ -46,7 +46,7 @@ Dialog::Dialog(QWidget *parent) : QDialog(parent), ui(new Ui::Dialog)
                 ui->connectedPhoneList->clear();
                 for (auto &item : devices) {
                     ui->serialBox->addItem(item);
-                    ui->connectedPhoneList->addItem(item+"-"+Config::getInstance().getNickName(item));
+                    ui->connectedPhoneList->addItem(Config::getInstance().getNickName(item) + "-" + item);
                 }
             } else if (args.contains("show") && args.contains("wlan0")) {
                 QString ip = m_adb.getDeviceIPFromStdOut();
@@ -77,18 +77,22 @@ Dialog::Dialog(QWidget *parent) : QDialog(parent), ui(new Ui::Dialog)
         }
     });
 
-    m_hideIcon = new QSystemTrayIcon();
+    m_hideIcon = new QSystemTrayIcon(this);
     m_hideIcon->setIcon(QIcon(":/image/tray/logo.png"));
-    m_menu = new QMenu();
+    m_menu = new QMenu(this);
-    m_quit = new QAction();
+    m_quit = new QAction(this);
-    m_showWindow = new QAction();;
+    m_showWindow = new QAction(this);
     m_showWindow->setText(tr("show"));
     m_quit->setText(tr("quit"));
     m_menu->addAction(m_showWindow);
     m_menu->addAction(m_quit);
     m_hideIcon->setContextMenu(m_menu);
+    m_hideIcon->show();
     connect(m_showWindow, &QAction::triggered, this, &Dialog::slotShow);
-    connect(m_quit, SIGNAL(triggered()), this, SLOT(close()));
+    connect(m_quit, &QAction::triggered, this, [this](){
+        m_hideIcon->hide();
+        qApp->quit();
+    });
     connect(m_hideIcon, &QSystemTrayIcon::activated,this,&Dialog::slotActivated);
 }
 
@@ -240,26 +244,12 @@ void Dialog::slotActivated(QSystemTrayIcon::ActivationReason reason)
 
 void Dialog::closeEvent(QCloseEvent *event)
 {
-    int res = QMessageBox::question(this,tr("warning"),tr("Quit or set tray?"),tr("Quit"),tr("Set tray"),tr("Cancel"));
+    this->hide();
-
+    m_hideIcon->showMessage(tr("Notice"),
-    if(res == 0)
+                          tr("Hidden here!"),
-    {
+                          QSystemTrayIcon::Information,
-       event->accept();
+                          3000);
-    }
+    event->ignore();
-    else if(res == 1)
-    {
-        this->hide();
-        m_hideIcon->show();
-        m_hideIcon->showMessage(tr("Notice"),
-                              tr("Hidden here!"),
-                              QSystemTrayIcon::Information,
-                              3000);
-        event->ignore();
-    }
-    else
-    {
-        event->ignore();
-    }
 }
 
 void Dialog::on_updateDevice_clicked()
@@ -621,6 +611,10 @@ void Dialog::on_useSingleModeCheck_clicked()
         ui->wirelessGroupBox->show();
         ui->usbGroupBox->show();
     }
+
+    QTimer::singleShot(0, this, [this](){
+        resize(width(), layout()->sizeHint().height());
+    });
 }
 
 void Dialog::on_serialBox_currentIndexChanged(const QString &arg1)

QtScrcpy/dialog.ui

@@ -7,7 +7,7 @@
     <x>0</x>
     <y>0</y>
     <width>500</width>
-    <height>745</height>
+    <height>769</height>
    </rect>
   </property>
   <property name="minimumSize">
@@ -72,10 +72,22 @@
       </item>
       <item>
        <widget class="QListWidget" name="connectedPhoneList">
+        <property name="sizePolicy">
+         <sizepolicy hsizetype="Expanding" vsizetype="Preferred">
+          <horstretch>0</horstretch>
+          <verstretch>0</verstretch>
+         </sizepolicy>
+        </property>
+        <property name="minimumSize">
+         <size>
+          <width>0</width>
+          <height>100</height>
+         </size>
+        </property>
         <property name="maximumSize">
          <size>
           <width>16777215</width>
-          <height>16777215</height>
+          <height>100</height>
          </size>
         </property>
        </widget>
@@ -751,10 +763,22 @@
    </item>
    <item>
     <widget class="QTextEdit" name="outEdit">
+     <property name="sizePolicy">
+      <sizepolicy hsizetype="Expanding" vsizetype="Preferred">
+       <horstretch>0</horstretch>
+       <verstretch>0</verstretch>
+      </sizepolicy>
+     </property>
      <property name="minimumSize">
       <size>
        <width>0</width>
-       <height>140</height>
+       <height>120</height>
+      </size>
+     </property>
+     <property name="maximumSize">
+      <size>
+       <width>16777215</width>
+       <height>120</height>
       </size>
      </property>
      <property name="focusPolicy">
@@ -768,6 +792,19 @@
      </property>
     </widget>
    </item>
+   <item>
+    <spacer name="verticalSpacer">
+     <property name="orientation">
+      <enum>Qt::Vertical</enum>
+     </property>
+     <property name="sizeHint" stdset="0">
+      <size>
+       <width>20</width>
+       <height>0</height>
+      </size>
+     </property>
+    </spacer>
+   </item>
   </layout>
  </widget>
  <layoutdefault spacing="6" margin="11"/>

QtScrcpy/fontawesome/CMakeLists.txt

@@ -0,0 +1,8 @@
+set(QS_SOURCES_FONTAWESOME
+    iconhelper.h
+    iconhelper.cpp
+)
+
+add_library(fontawesome ${QS_SOURCES_FONTAWESOME})
+target_include_directories(fontawesome PUBLIC ${CMAKE_CURRENT_SOURCE_DIR})
+target_link_libraries(fontawesome PRIVATE Qt${QT_VERSION_MAJOR}::Widgets)

QtScrcpy/main.cpp

@@ -56,6 +56,10 @@ int main(int argc, char *argv[])
 
     QCoreApplication::setAttribute(Qt::AA_EnableHighDpiScaling);
 
+#if (QT_VERSION >= QT_VERSION_CHECK(5,14,0))
+    QGuiApplication::setHighDpiScaleFactorRoundingPolicy(Qt::HighDpiScaleFactorRoundingPolicy::PassThrough);
+#endif
+
     QSurfaceFormat varFormat = QSurfaceFormat::defaultFormat();
     varFormat.setVersion(2, 0);
     varFormat.setProfile(QSurfaceFormat::NoProfile);
@@ -104,13 +108,9 @@ int main(int argc, char *argv[])
     g_mainDlg->setWindowTitle(Config::getInstance().getTitle());
     g_mainDlg->show();
 
-    qInfo(
+    qInfo() << QObject::tr("This software is completely open source and free. Use it at your own risk. You can download it at the "
-        "%s",
+            "following address:");
-        QObject::tr("This software is completely open source and free. Strictly used for illegal purposes, or at your own risk. You can download it at the "
+    qInfo() << QString("QtScrcpy %1 <https://github.com/barry-ran/QtScrcpy>").arg(QCoreApplication::applicationVersion());
-                    "following address:")
-            .toUtf8()
-            .data());
-    qInfo() << QString("QtScrcpy %1 <https://github.com/barry-ran/QtScrcpy>").arg(QCoreApplication::applicationVersion()).toUtf8();
 
     int ret = a.exec();
 
@@ -131,11 +131,11 @@ void installTranslator()
     QString languagePath = ":/i18n/";
     switch (language) {
     case QLocale::Chinese:
-        languagePath += "QtScrcpy_zh.qm";
+        languagePath += "zh_CN.qm";
         break;
     case QLocale::English:
     default:
-        languagePath += "QtScrcpy_en.qm";
+        languagePath += "en_US.qm";
     }
 
     translator.load(languagePath);

QtScrcpy/res/i18n/en_US.ts

@@ -16,22 +16,18 @@
         <translation type="vanished">file transfer failed</translation>
     </message>
     <message>
-        <location filename="../../device/device.cpp" line="184"/>
         <source>install apk</source>
         <translation>install apk</translation>
     </message>
     <message>
-        <location filename="../../device/device.cpp" line="186"/>
         <source>file transfer</source>
         <translation>file transfer</translation>
     </message>
     <message>
-        <location filename="../../device/device.cpp" line="190"/>
         <source>wait current %1 to complete</source>
         <translation>wait current %1 to complete</translation>
     </message>
     <message>
-        <location filename="../../device/device.cpp" line="193"/>
         <source>%1 complete, save in %2</source>
         <translation>%1 complete, save in %2</translation>
     </message>
@@ -41,7 +37,6 @@
         <translation type="vanished">%1 complete\n save in %2</translation>
     </message>
     <message>
-        <location filename="../../device/device.cpp" line="196"/>
         <source>%1 failed</source>
         <translation>%1 failed</translation>
     </message>
@@ -49,134 +44,108 @@
 <context>
     <name>Dialog</name>
     <message>
-        <location filename="../../dialog.ui" line="562"/>
         <source>Wireless</source>
         <translation>Wireless</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="646"/>
         <source>wireless connect</source>
         <translation>wireless connect</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="662"/>
         <source>wireless disconnect</source>
         <translation>wireless disconnect</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="89"/>
         <source>Start Config</source>
         <translation>Start Config</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="225"/>
         <source>record save path:</source>
         <translation>record save path:</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="242"/>
-        <location filename="../../dialog.cpp" line="449"/>
         <source>select path</source>
         <translation>select path</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="156"/>
         <source>record format：</source>
         <translation>record format:</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="380"/>
         <source>record screen</source>
         <translation>record screen</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="325"/>
         <source>frameless</source>
         <translation>frameless</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="32"/>
         <source>Use Simple Mode</source>
         <translatorcomment>Use Simple Mode</translatorcomment>
         <translation>Use Simple Mode</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="42"/>
         <source>Simple Mode</source>
         <translatorcomment>Simple Mode</translatorcomment>
         <translation>Simple Mode</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="53"/>
         <source>WIFI Connect</source>
         <translatorcomment>WIFI Connect</translatorcomment>
         <translation>WIFI Connect</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="60"/>
         <source>USB Connect</source>
         <translatorcomment>USB Connect</translatorcomment>
         <translation>USB Connect</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="69"/>
         <source>Double click to connect:</source>
         <translation>Double click to connect:</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="184"/>
         <source>lock orientation:</source>
         <translation>lock orientation:</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="387"/>
         <source>show fps</source>
         <translation>show fps</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="394"/>
         <source>stay awake</source>
         <translation>stay awake</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="421"/>
         <source>device name:</source>
         <translatorcomment>device name:</translatorcomment>
         <translation>device name:</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="438"/>
         <source>update name</source>
         <translatorcomment>update name</translatorcomment>
         <translation>update name</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="519"/>
         <source>stop all server</source>
         <translation>stop all server</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="696"/>
         <source>adb command:</source>
         <translation>adb command:</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="732"/>
         <source>terminate</source>
         <translation>terminate</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="719"/>
         <source>execute</source>
         <translation>execute</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="745"/>
         <source>clear</source>
         <translation>clear</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="370"/>
         <source>reverse connection</source>
         <translation>reverse connection</translation>
     </message>
@@ -185,57 +154,46 @@
         <translation type="vanished">auto enable</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="354"/>
         <source>background record</source>
         <translation>background record</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="318"/>
         <source>screen-off</source>
         <translation>screen-off</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="287"/>
         <source>apply</source>
         <translation>apply</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="142"/>
         <source>max size:</source>
         <translation>max size:</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="338"/>
         <source>always on top</source>
         <translation>always on top</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="280"/>
         <source>refresh script</source>
         <translation>refresh script</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="536"/>
         <source>get device IP</source>
         <translation>get device IP</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="407"/>
         <source>USB line</source>
         <translation>USB line</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="491"/>
         <source>stop server</source>
         <translation>stop server</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="481"/>
         <source>start server</source>
         <translation>start server</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="471"/>
         <source>device serial:</source>
         <translation>device serial:</translation>
     </message>
@@ -244,80 +202,66 @@
         <translation type="vanished">Config</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="125"/>
         <source>bit rate:</source>
         <translation>bit rate:</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="546"/>
         <source>start adbd</source>
         <translation>start adbd</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="526"/>
         <source>refresh devices</source>
         <translation>refresh devices</translation>
     </message>
     <message>
-        <location filename="../../dialog.cpp" line="85"/>
         <source>show</source>
         <translatorcomment>show</translatorcomment>
         <translation>show</translation>
     </message>
     <message>
-        <location filename="../../dialog.cpp" line="86"/>
         <source>quit</source>
         <translatorcomment>quit</translatorcomment>
         <translation>quit</translation>
     </message>
     <message>
-        <location filename="../../dialog.cpp" line="121"/>
         <source>original</source>
         <translation>original</translation>
     </message>
     <message>
-        <location filename="../../dialog.cpp" line="126"/>
         <source>no lock</source>
         <translation>no lock</translation>
     </message>
     <message>
-        <location filename="../../dialog.cpp" line="243"/>
         <source>warning</source>
         <translatorcomment>Warning</translatorcomment>
         <translation>Warning</translation>
     </message>
     <message>
-        <location filename="../../dialog.cpp" line="243"/>
         <source>Quit or set tray?</source>
         <translatorcomment>Quit or set tray?</translatorcomment>
         <translation>Quit or set tray?</translation>
     </message>
     <message>
-        <location filename="../../dialog.cpp" line="243"/>
         <source>Quit</source>
         <translatorcomment>Quit</translatorcomment>
         <translation>Quit</translation>
     </message>
     <message>
-        <location filename="../../dialog.cpp" line="243"/>
         <source>Set tray</source>
         <translatorcomment>Set tray</translatorcomment>
         <translation>Set tray</translation>
     </message>
     <message>
-        <location filename="../../dialog.cpp" line="243"/>
         <source>Cancel</source>
         <translatorcomment>Cancel</translatorcomment>
         <translation>Cancel</translation>
     </message>
     <message>
-        <location filename="../../dialog.cpp" line="253"/>
         <source>Notice</source>
         <translatorcomment>Notice</translatorcomment>
         <translation>Notice</translation>
     </message>
     <message>
-        <location filename="../../dialog.cpp" line="254"/>
         <source>Hidden here!</source>
         <translatorcomment>Hidden here!</translatorcomment>
         <translation>Hidden here!</translation>
@@ -326,17 +270,14 @@
 <context>
     <name>InputConvertGame</name>
     <message>
-        <location filename="../../device/controller/inputconvert/inputconvertgame.cpp" line="507"/>
         <source>current keymap mode: %1</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../../device/controller/inputconvert/inputconvertgame.cpp" line="507"/>
         <source>custom</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../../device/controller/inputconvert/inputconvertgame.cpp" line="507"/>
         <source>normal</source>
         <translation type="unfinished"></translation>
     </message>
@@ -344,7 +285,6 @@
 <context>
     <name>KeyMap</name>
     <message>
-        <location filename="../../device/controller/inputconvert/keymap/keymap.cpp" line="307"/>
         <source>Script updated, current keymap mode:normal, Press ~ key to switch keymap mode</source>
         <translation type="unfinished"></translation>
     </message>
@@ -362,25 +302,25 @@ You can download it at the following address:</source>
         <translation type="vanished">This software is completely open source and free.\nStrictly used for illegal purposes, or at your own risk.\nYou can download it at the following address:</translation>
     </message>
     <message>
-        <location filename="../../main.cpp" line="109"/>
         <source>This software is completely open source and free. Strictly used for illegal purposes, or at your own risk. You can download it at the following address:</source>
-        <translation>This software is completely open source and free. Strictly used for illegal purposes, or at your own risk. You can download it at the following address:</translation>
+        <translation type="vanished">This software is completely open source and free. Strictly used for illegal purposes, or at your own risk. You can download it at the following address:</translation>
+    </message>
+    <message>
+        <source>This software is completely open source and free. Use it at your own risk. You can download it at the following address:</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>ToolForm</name>
     <message>
-        <location filename="../../device/ui/toolform.ui" line="14"/>
         <source>Tool</source>
         <translation>Tool</translation>
     </message>
     <message>
-        <location filename="../../device/ui/toolform.ui" line="33"/>
         <source>full screen</source>
         <translation>full screen</translation>
     </message>
     <message>
-        <location filename="../../device/ui/toolform.ui" line="56"/>
         <source>expand notify</source>
         <translation>expand notify</translation>
     </message>
@@ -393,52 +333,42 @@ You can download it at the following address:</source>
         <translation type="vanished">turn on</translation>
     </message>
     <message>
-        <location filename="../../device/ui/toolform.ui" line="66"/>
         <source>touch switch</source>
         <translation>touch switch</translation>
     </message>
     <message>
-        <location filename="../../device/ui/toolform.ui" line="76"/>
         <source>close screen</source>
         <translation>close screen</translation>
     </message>
     <message>
-        <location filename="../../device/ui/toolform.ui" line="86"/>
         <source>power</source>
         <translation>power</translation>
     </message>
     <message>
-        <location filename="../../device/ui/toolform.ui" line="96"/>
         <source>volume up</source>
         <translation>volume up</translation>
     </message>
     <message>
-        <location filename="../../device/ui/toolform.ui" line="106"/>
         <source>volume down</source>
         <translation>volume down</translation>
     </message>
     <message>
-        <location filename="../../device/ui/toolform.ui" line="116"/>
         <source>app switch</source>
         <translation>app switch</translation>
     </message>
     <message>
-        <location filename="../../device/ui/toolform.ui" line="126"/>
         <source>menu</source>
         <translation>menu</translation>
     </message>
     <message>
-        <location filename="../../device/ui/toolform.ui" line="136"/>
         <source>home</source>
         <translation>home</translation>
     </message>
     <message>
-        <location filename="../../device/ui/toolform.ui" line="146"/>
         <source>return</source>
         <translation>return</translation>
     </message>
     <message>
-        <location filename="../../device/ui/toolform.ui" line="156"/>
         <source>screen shot</source>
         <translation>screen shot</translation>
     </message>
@@ -458,7 +388,6 @@ You can download it at the following address:</source>
         <translation type="vanished">file transfer failed</translation>
     </message>
     <message>
-        <location filename="../../device/ui/videoform.cpp" line="749"/>
         <source>file does not exist</source>
         <translation>file does not exist</translation>
     </message>

QtScrcpy/res/i18n/zh_CN.ts

@@ -16,22 +16,18 @@
         <translation type="vanished">文件传输失败</translation>
     </message>
     <message>
-        <location filename="../../device/device.cpp" line="184"/>
         <source>install apk</source>
         <translation>安装apk</translation>
     </message>
     <message>
-        <location filename="../../device/device.cpp" line="186"/>
         <source>file transfer</source>
         <translation>文件传输</translation>
     </message>
     <message>
-        <location filename="../../device/device.cpp" line="190"/>
         <source>wait current %1 to complete</source>
         <translation>等待当前%1完成</translation>
     </message>
     <message>
-        <location filename="../../device/device.cpp" line="193"/>
         <source>%1 complete, save in %2</source>
         <translation>%1完成,保存在%2</translation>
     </message>
@@ -41,7 +37,6 @@
         <translation type="vanished">%1完成\n 保存在 %2</translation>
     </message>
     <message>
-        <location filename="../../device/device.cpp" line="196"/>
         <source>%1 failed</source>
         <translation>%1 失败</translation>
     </message>
@@ -49,134 +44,108 @@
 <context>
     <name>Dialog</name>
     <message>
-        <location filename="../../dialog.ui" line="562"/>
         <source>Wireless</source>
         <translation>无线</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="646"/>
         <source>wireless connect</source>
         <translation>无线连接</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="662"/>
         <source>wireless disconnect</source>
         <translation>无线断开</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="89"/>
         <source>Start Config</source>
         <translation>启动配置</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="225"/>
         <source>record save path:</source>
         <translation>录像保存路径：</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="242"/>
-        <location filename="../../dialog.cpp" line="449"/>
         <source>select path</source>
         <translation>选择路径</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="156"/>
         <source>record format：</source>
         <translation>录制格式：</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="380"/>
         <source>record screen</source>
         <translation>录制屏幕</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="325"/>
         <source>frameless</source>
         <translation>无边框</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="32"/>
         <source>Use Simple Mode</source>
         <translatorcomment>启用精简模式</translatorcomment>
         <translation>启用精简模式</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="42"/>
         <source>Simple Mode</source>
         <translatorcomment>精简模式</translatorcomment>
         <translation>精简模式</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="53"/>
         <source>WIFI Connect</source>
         <translatorcomment>一键WIFI连接</translatorcomment>
         <translation>一键WIFI连接</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="60"/>
         <source>USB Connect</source>
         <translatorcomment>一键USB连接</translatorcomment>
         <translation>一键USB连接</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="69"/>
         <source>Double click to connect:</source>
         <translation>双击连接：</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="184"/>
         <source>lock orientation:</source>
         <translation>锁定方向：</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="387"/>
         <source>show fps</source>
         <translation>显示fps</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="394"/>
         <source>stay awake</source>
         <translation>保持唤醒</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="421"/>
         <source>device name:</source>
         <translatorcomment>设备名称:</translatorcomment>
         <translation>设备名称:</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="438"/>
         <source>update name</source>
         <translatorcomment>更新设置名称</translatorcomment>
         <translation>更新设置名称</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="519"/>
         <source>stop all server</source>
         <translation>停止所有服务</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="696"/>
         <source>adb command:</source>
         <translation>adb命令：</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="732"/>
         <source>terminate</source>
         <translation>终止</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="719"/>
         <source>execute</source>
         <translation>执行</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="745"/>
         <source>clear</source>
         <translation>清理</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="370"/>
         <source>reverse connection</source>
         <translation>反向连接</translation>
     </message>
@@ -185,57 +154,46 @@
         <translation type="vanished">自动启用脚本</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="354"/>
         <source>background record</source>
         <translation>后台录制</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="318"/>
         <source>screen-off</source>
         <translation>自动息屏</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="287"/>
         <source>apply</source>
         <translation>应用脚本</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="142"/>
         <source>max size:</source>
         <translation>最大尺寸：</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="338"/>
         <source>always on top</source>
         <translation>窗口置顶</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="280"/>
         <source>refresh script</source>
         <translation>刷新脚本</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="536"/>
         <source>get device IP</source>
         <translation>获取设备IP</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="407"/>
         <source>USB line</source>
         <translation>USB线</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="491"/>
         <source>stop server</source>
         <translation>停止服务</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="481"/>
         <source>start server</source>
         <translation>启动服务</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="471"/>
         <source>device serial:</source>
         <translation>设备序列号：</translation>
     </message>
@@ -244,80 +202,66 @@
         <translation type="vanished">配置</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="125"/>
         <source>bit rate:</source>
         <translation>比特率：</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="546"/>
         <source>start adbd</source>
         <translation>启动adbd</translation>
     </message>
     <message>
-        <location filename="../../dialog.ui" line="526"/>
         <source>refresh devices</source>
         <translation>刷新设备列表</translation>
     </message>
     <message>
-        <location filename="../../dialog.cpp" line="85"/>
         <source>show</source>
         <translatorcomment>显示</translatorcomment>
         <translation>显示</translation>
     </message>
     <message>
-        <location filename="../../dialog.cpp" line="86"/>
         <source>quit</source>
         <translatorcomment>退出</translatorcomment>
         <translation>退出</translation>
     </message>
     <message>
-        <location filename="../../dialog.cpp" line="121"/>
         <source>original</source>
         <translation>原始</translation>
     </message>
     <message>
-        <location filename="../../dialog.cpp" line="126"/>
         <source>no lock</source>
         <translation>不锁定</translation>
     </message>
     <message>
-        <location filename="../../dialog.cpp" line="243"/>
         <source>warning</source>
         <translatorcomment>警告</translatorcomment>
         <translation>警告</translation>
     </message>
     <message>
-        <location filename="../../dialog.cpp" line="243"/>
         <source>Quit or set tray?</source>
         <translatorcomment>退出还是最小化到托盘？</translatorcomment>
         <translation>退出还是最小化到托盘？</translation>
     </message>
     <message>
-        <location filename="../../dialog.cpp" line="243"/>
         <source>Quit</source>
         <translatorcomment>退出</translatorcomment>
         <translation>退出</translation>
     </message>
     <message>
-        <location filename="../../dialog.cpp" line="243"/>
         <source>Set tray</source>
         <translatorcomment>最小化到系统托盘</translatorcomment>
         <translation>最小化到系统托盘</translation>
     </message>
     <message>
-        <location filename="../../dialog.cpp" line="243"/>
         <source>Cancel</source>
         <translatorcomment>取消</translatorcomment>
         <translation>取消</translation>
     </message>
     <message>
-        <location filename="../../dialog.cpp" line="253"/>
         <source>Notice</source>
         <translatorcomment>提示</translatorcomment>
         <translation>提示</translation>
     </message>
     <message>
-        <location filename="../../dialog.cpp" line="254"/>
         <source>Hidden here!</source>
         <translatorcomment>安卓录屏程序隐藏在这！</translatorcomment>
         <translation>安卓录屏程序隐藏在这！</translation>
@@ -326,17 +270,14 @@
 <context>
     <name>InputConvertGame</name>
     <message>
-        <location filename="../../device/controller/inputconvert/inputconvertgame.cpp" line="507"/>
         <source>current keymap mode: %1</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../../device/controller/inputconvert/inputconvertgame.cpp" line="507"/>
         <source>custom</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../../device/controller/inputconvert/inputconvertgame.cpp" line="507"/>
         <source>normal</source>
         <translation type="unfinished"></translation>
     </message>
@@ -344,7 +285,6 @@
 <context>
     <name>KeyMap</name>
     <message>
-        <location filename="../../device/controller/inputconvert/keymap/keymap.cpp" line="307"/>
         <source>Script updated, current keymap mode:normal, Press ~ key to switch keymap mode</source>
         <translation type="unfinished"></translation>
     </message>
@@ -352,35 +292,21 @@
 <context>
     <name>QObject</name>
     <message>
-        <source>This software is completely open source and free, you can download it at the following address:</source>
+        <source>This software is completely open source and free. Use it at your own risk. You can download it at the following address:</source>
-        <translation type="vanished">本软件完全开源免费，你可以在下面的地址下载：</translation>
+        <translation>本软件完全开源免费，作者不对使用该软件产生的一切后果负责。你可以在以下地址下载：</translation>
-    </message>
-    <message>
-        <source>This software is completely open source and free.
-Strictly used for illegal purposes, or at your own risk.
-You can download it at the following address:</source>
-        <translation type="vanished">本软件完全开源免费.\n严禁用于非法用途，否则后果自负.\n你可以在下面地址下载:</translation>
-    </message>
-    <message>
-        <location filename="../../main.cpp" line="109"/>
-        <source>This software is completely open source and free. Strictly used for illegal purposes, or at your own risk. You can download it at the following address:</source>
-        <translation>本软件完全开源免费，严禁用于非法用途，否则后果自负，你可以在下面地址下载:</translation>
     </message>
 </context>
 <context>
     <name>ToolForm</name>
     <message>
-        <location filename="../../device/ui/toolform.ui" line="14"/>
         <source>Tool</source>
         <translation>工具</translation>
     </message>
     <message>
-        <location filename="../../device/ui/toolform.ui" line="33"/>
         <source>full screen</source>
         <translation>全屏</translation>
     </message>
     <message>
-        <location filename="../../device/ui/toolform.ui" line="56"/>
         <source>expand notify</source>
         <translation>下拉通知</translation>
     </message>
@@ -393,52 +319,42 @@ You can download it at the following address:</source>
         <translation type="vanished">解锁</translation>
     </message>
     <message>
-        <location filename="../../device/ui/toolform.ui" line="66"/>
         <source>touch switch</source>
         <translation>触摸显示开关</translation>
     </message>
     <message>
-        <location filename="../../device/ui/toolform.ui" line="76"/>
         <source>close screen</source>
         <translation>关闭屏幕</translation>
     </message>
     <message>
-        <location filename="../../device/ui/toolform.ui" line="86"/>
         <source>power</source>
         <translation>电源</translation>
     </message>
     <message>
-        <location filename="../../device/ui/toolform.ui" line="96"/>
         <source>volume up</source>
         <translation>音量加</translation>
     </message>
     <message>
-        <location filename="../../device/ui/toolform.ui" line="106"/>
         <source>volume down</source>
         <translation>音量减</translation>
     </message>
     <message>
-        <location filename="../../device/ui/toolform.ui" line="116"/>
         <source>app switch</source>
         <translation>切换应用</translation>
     </message>
     <message>
-        <location filename="../../device/ui/toolform.ui" line="126"/>
         <source>menu</source>
         <translation>菜单</translation>
     </message>
     <message>
-        <location filename="../../device/ui/toolform.ui" line="136"/>
         <source>home</source>
         <translation>主界面</translation>
     </message>
     <message>
-        <location filename="../../device/ui/toolform.ui" line="146"/>
         <source>return</source>
         <translation>返回</translation>
     </message>
     <message>
-        <location filename="../../device/ui/toolform.ui" line="156"/>
         <source>screen shot</source>
         <translation>截图</translation>
     </message>
@@ -458,7 +374,6 @@ You can download it at the following address:</source>
         <translation type="vanished">文件传输失败</translation>
     </message>
     <message>
-        <location filename="../../device/ui/videoform.cpp" line="749"/>
         <source>file does not exist</source>
         <translation>文件不存在</translation>
     </message>

QtScrcpy/res/res.qrc

@@ -22,8 +22,8 @@
         <file>qss/psblack/radiobutton_checked_disable.png</file>
         <file>qss/psblack/radiobutton_unchecked.png</file>
         <file>qss/psblack/radiobutton_unchecked_disable.png</file>
-        <file>i18n/QtScrcpy_en.qm</file>
+        <file>i18n/en_US.qm</file>
-        <file>i18n/QtScrcpy_zh.qm</file>
+        <file>i18n/zh_CN.qm</file>
         <file>image/tray/logo.png</file>
     </qresource>
 </RCC>

QtScrcpy/uibase/CMakeLists.txt

@@ -0,0 +1,10 @@
+set(QS_SOURCES_UIBASE
+    keepratiowidget.h
+    keepratiowidget.cpp
+    magneticwidget.h
+    magneticwidget.cpp
+)
+
+add_library(uibase ${QS_SOURCES_UIBASE})
+target_include_directories(uibase PUBLIC ${CMAKE_CURRENT_SOURCE_DIR})
+target_link_libraries(uibase PRIVATE Qt${QT_VERSION_MAJOR}::Widgets)

QtScrcpy/util/CMakeLists.txt

@@ -0,0 +1,21 @@
+set(QS_SUBDIRECTORIES_UTIL
+    mousetap
+)
+
+set(QS_SOURCES_UTIL
+    bufferutil.h
+    bufferutil.cpp
+    compat.h
+    config.h
+    config.cpp
+)
+
+add_library(util ${QS_SOURCES_UTIL})
+
+target_include_directories(util PUBLIC ${CMAKE_CURRENT_SOURCE_DIR})
+
+foreach(QS_SUBDIRECTORY_UTIL ${QS_SUBDIRECTORIES_UTIL})
+    add_subdirectory (${QS_SUBDIRECTORY_UTIL})
+endforeach()
+
+target_link_libraries(util PRIVATE Qt${QT_VERSION_MAJOR}::Widgets)

QtScrcpy/util/mousetap/CMakeLists.txt

@@ -0,0 +1,50 @@
+set(QS_SOURCES_UTIL_MOUSETAP
+    mousetap.h
+    mousetap.cpp
+)
+
+# Microsoft Windows
+if(WIN32)
+
+    list(APPEND QS_SOURCES_UTIL_MOUSETAP
+        winmousetap.h
+        winmousetap.cpp
+    )
+    set(QS_EXTERNAL_LIBS_UTIL_MOUSETAP User32)
+
+elseif(UNIX)
+# macOS
+    if(${CMAKE_SYSTEM_NAME} MATCHES "Darwin")
+        
+        find_library(APPKIT AppKit REQUIRED)
+        set(QS_EXTERNAL_LIBS_UTIL_MOUSETAP ${APPKIT})
+        
+        list(APPEND QS_SOURCES_UTIL_MOUSETAP
+            cocoamousetap.h
+            cocoamousetap.mm
+        )
+
+        target_compile_options(mousetap "-mmacosx-version-min=10.6")
+
+    # Linux, BSD, etc.
+    else()
+        
+        find_package(QT NAMES Qt6 Qt5 COMPONENTS X11Extras REQUIRED)
+        find_package(Qt${QT_VERSION_MAJOR} COMPONENTS X11Extras REQUIRED)
+        set(QS_EXTERNAL_LIBS_UTIL_MOUSETAP
+            Qt${QT_VERSION_MAJOR}::X11Extras
+            xcb
+        )
+
+        list(APPEND QS_SOURCES_UTIL_MOUSETAP
+            xmousetap.h
+            xmousetap.cpp
+        )
+
+    endif()
+endif()
+
+add_library(mousetap ${QS_SOURCES_UTIL_MOUSETAP})
+target_link_libraries(mousetap PRIVATE
+    Qt${QT_VERSION_MAJOR}::Widgets
+    ${QS_EXTERNAL_LIBS_UTIL_MOUSETAP})

QtScrcpy/version

@@ -1 +1 @@
-0.0.0
+1.6.0

README.md

@@ -72,7 +72,7 @@ cross-platform|self implemented|provided by Qt
 language|C|C++
 style|sync|async
 keymap|no custom keymap|support custom keymap
-build|meson+gradle|Qt Creator
+build|meson+gradle|qmake or CMake
 
 - It's very easy to customize your GUI with Qt
 - Asynchronous programming of Qt-based signal slot mechanism improves performance
@@ -246,9 +246,10 @@ There are several reasons listed as below according to importance (high to low).
 All the dependencies are provided and it is easy to compile.
 
 ### PC client
-1. Set up the Qt development environment on the target platform (Qt == 5.15.2, vs == 2019 (mingw not supported))
+1. Set up the Qt development environment on the target platform.
+An Up-to-date Qt5 (i.e. 5.15.2 or later) is recommended. For Windows, you can choose MSVC 2019 or MinGW 8.1.0, but please be noted that currently only **CMake** scripts support MinGW.
 2. Clone the project
-3. Open the project root directory all.pro with QtCreator
+3. Open the project root directory `all.pro` or `CMakeLists.txt` with QtCreator
 4. Compile and run
 
 ### Android (If you do not have special requirements, you can directly use the built-in scrcpy-server.jar)
@@ -280,7 +281,7 @@ Since it is based on scrcpy, respect its Licence
 
 [Barry CSDN](https://blog.csdn.net/rankun1)
 
-An ordinary programmer, working mainly in C++ for desktop client development, graduated from Shandong for more than a year of steel simulation education software, and later moved to Shanghai to work in security, online education related fields, familiar with audio and video. I have an understanding of audio and video fields such as voice calls, live education, video conferencing and other related solutions. At the same time have android, linux server and other development experience.
+An ordinary programmer, working mainly in C++ for desktop client development, graduated from Shandong for more than a year of steel simulation education software, and later moved to Shanghai to work in security, online education related fields, familiar with audio and video. I have an understanding of audio and video fields such as voice calls, live education, video conferencing and other related solutions. I also have experience in Android, Linux server and other kinds of development.
 
 ## Contributors
 

README_zh.md

@@ -69,7 +69,7 @@ QtScrcpy可以通过USB(或通过TCP/IP)连接Android设备，并进行显示和
 编程语言|C|C++
 编程方式|同步|异步
 按键映射|不支持自定义|支持自定义按键映射
-编译方式|meson+gradle|Qt Creator
+编译方式|meson+gradle|qmake or CMake
 
 - 使用Qt可以非常容易的定制自己的界面
 - 基于Qt的信号槽机制的异步编程提高性能
@@ -243,10 +243,11 @@ Mac OS平台，你可以直接使用我编译好的可执行程序:
 尽量提供了所有依赖资源，方便傻瓜式编译。
 
 ### PC端
-1. 目标平台上搭建Qt开发环境(Qt == 5.15.2, vs == 2019 (**不支持mingw**))
+1. 在目标平台上搭建Qt开发环境
+我们建议使用最新的Qt5版本（5.15.2或更高）。在Windows上你可以自由选择MSVC 2019或MinGW 8.1.0，但需要注意的是现阶段只有**CMake**脚本提供了对MinGW的支持。
 2. 克隆该项目
-3. 使用QtCreator打开项目根目录all.pro
+3. 使用QtCreator打开项目根目录`all.pro`或`CMakeLists.txt`
-4. 编译，运行即可
+4. 编译，运行
 
 ### Android端 （没有修改需求的话直接使用自带的scrcpy-server即可）
 1. 目标平台上搭建Android开发环境
@@ -276,4 +277,4 @@ Mac OS平台，你可以直接使用我编译好的可执行程序:
 
 [Barry的CSDN](https://blog.csdn.net/rankun1)
 
-一枚普通的程序员，工作中主要使用C++进行桌面客户端开发，一毕业在山东做过一年多钢铁仿真教育软件，后来转战上海先后从事安防，在线教育相关领域工作，对音视频比较熟悉，对音视频领域如语音通话，直播教育，视频会议等相关解决方案有所了解。同时具有android，linux服务器等开发经验。
+一枚普通的程序员，工作中主要使用C++进行桌面客户端开发，一毕业在山东做过一年多钢铁仿真教育软件，后来转战上海先后从事安防，在线教育相关领域工作，对音视频比较熟悉，对音视频领域如语音通话，直播教育，视频会议等相关解决方案有所了解。同时具有Android，Linux服务器等开发经验。

all.pro

@@ -3,5 +3,5 @@ SUBDIRS = QtScrcpy
 
 # 多语言翻译文件
 TRANSLATIONS = \
-    $$PWD/QtScrcpy/res/i18n/QtScrcpy_zh.ts \
+    $$PWD/QtScrcpy/res/i18n/zh_CN.ts \
-    $$PWD/QtScrcpy/res/i18n/QtScrcpy_en.ts
+    $$PWD/QtScrcpy/res/i18n/en_US.ts